Surfing is an exhilarating sport that requires preparation and skill. One essential aspect of surfing preparation is waxing your surfboard. A well-waxed surfboard provides the necessary grip that allows you to maintain your balance and perform tricks. In this article, we will show you how to wax a surfboard in six easy steps.

1.Choose the right wax

There are several types of surfboard waxes available, with each type formulated for specific water temperatures. Be sure to choose a wax that suits the water temperature where you’ll be surfing. Waxes come in three general categories – cold water, warm water, and tropical water waxes.

2.Clean your surfboard

Before applying fresh wax, remove any old wax residue from your board. Using a wax comb or plastic scraper, gently scrape off the old wax in long strokes, taking care not to damage the surface of the board. After removing all the old wax, use a clean cloth to wipe down the surface of the board.

3.Prepare your wax

Start by forming a base layer of wax on your board; this will make it easier for the subsequent layers to adhere properly. Hold your wax bar and apply light pressure onto it with a corner of the bar facing down towards the board.

4.Apply the basecoat

Begin at the tail end of your surfboard and apply medium-length parallel strokes with even pressure along the width of the board until you reach its nose. After creating horizontal lines, repeat this process while applying vertical lines in a crisscross pattern for maximum coverage and traction.

5.Apply topcoat

After successfully applying the basecoat, it’s time for you to add a topcoat for added grip and texture using circular motions while pressing lightly on your wax bar. Continue applying until you cover every inch of your basecoat pattern.

6.Maintain your surfboard wax

Keep your surfboard wax in optimal condition by using a wax comb every few sessions to maintain the bumps and grip. Gently scrape off any dirt or sand accumulated on the surface of your wax and, if needed, apply a fresh topcoat layer.

By following these six steps, you can ensure that your surfboard is always well maintained and ready for every wave. With a proper wax job, you’ll have the extra grip and control needed to improve your surfing performance and enjoy the ocean with confidence.