Removing a license plate is a simple task that any car owner can accomplish by themselves. Whether you’re selling your vehicle, changing the registration, or revamping your ride with custom plates, follow these nine easy steps to remove your license plate hassle-free.

1.Gather tools and materials:Before starting, make sure you have a flathead screwdriver, wrench, gloves (optional), and a clean towel or cloth.

2.Park in a safe location:Find a flat and stable surface to park your car, preferably away from traffic and other distractions.

3.Open the trunk or hatch:This will provide easier access to the license plate screws and better leverage when removing them.

4.Identify screws:Locate the screws or bolts holding the license plate in place. Most vehicles have two or four screws/bolts located in each corner of the plate.

5.Remove stubborn screws:If the screws are rusty or coated with debris, clean them with a cloth or soft brush to prevent damage.

6.Loosen the screws/bolts:Put on your gloves (if desired) and carefully insert the flathead screwdriver into the slot of each screw. For bolts, use a wrench that matches the size of the bolt head. Apply pressure and turn counterclockwise until the screw/bolt is loose enough to remove with your fingers.

7.Remove the license plate:While holding onto each screw/bolt with your fingers, gently wiggle the license plate until it comes free from the vehicle.

8.Store safely:Place your removed license plate in a safe place such as inside your trunk or garage until you are ready to install a new one.

9.Inspect for damage:After removing your license plate, closely examine both it and the area it previously occupied on your vehicle for any signs of damage such as rust spots or cracks in the paint.

By following these nine simple steps, you’ll be well on your way to successfully removing your license plate like a pro. Remember to exercise caution and patience throughout, and don’t hesitate to consult a professional if any issues arise.