How to Make a Tire Rocker: 12 Steps
![](https://www.thetechedvocate.org/wp-content/uploads/2023/10/How-to-Make-a-Tire-Rocker.jpg)
A tire rocker is a unique and environmentally friendly way to transform an old tire into a fun outdoor plaything for kids. Recycling an old tire for this purpose can reduce the amount of waste in landfills, while providing hours of entertainment for little ones. Follow these 12 easy steps to create your very own tire rocker.
1. Gather materials: You’ll need an old tire, a saw, a drill, sandpaper, paint, heavy-duty rope or chain, and durable hardware for attaching the tire to a sturdy support.
2. Clean the tire: Rinse the tire thoroughly with a garden hose to remove any dirt or debris. You may also use soap and a scrub brush if necessary. Allow it to dry completely before proceeding.
3. Cut the tire: Using a saw, carefully cut the tire in half widthwise. This will create two separate pieces with one smooth edge (the tread) and one jagged edge (the cut side).
4. Sand the edges: To prevent injury from sharp edges, use sandpaper to smooth out the cut side of both halves of the tire.
5. Paint the tire: Apply a coat of paint in your desired color to both halves of the tire. This is optional but can add a fun and personalized touch to your rocker.
6. Drill holes: Using a power drill, make four evenly spaced holes approximately 2 inches from the edge on both halves of the tire’s smooth side.
7. Attach ropes or chains: Measure out four identical lengths of heavy-duty rope or chain long enough to reach from your chosen support to the ground with enough slack for rocking back and forth. Secure one end of each rope or chain to each drilled hole using durable hardware such as carabiners or screw-lock links.
8. Ready your support: Choose a sturdy horizontal support structure such as a tree branch or swing set crossbeam. Make sure it can accommodate the combined weight of the rocker and child.
9. Attach the tire to support: Loop the free end of each rope or chain around your chosen support and secure with a strong knot or additional hardware.
10. Check for stability: Before allowing any children to use the tire rocker, ensure that all connections are secure and the tire is balanced and level with the ground.
11. Add padding (optional): For added comfort, you can place a cushion or an outdoor seat pad on the tread side of the tire.
12. Enjoy your tire rocker: Once everything is secure and in place, your tire rocker is ready for hours of fun for kids.
By following these 12 straightforward steps, you can turn an old tire into an enjoyable and eco-friendly outdoor playtime addition. Get creative with colors and decorations, and breathe new life into a discarded tire with a DIY tire rocker!