Driving a car on two wheels, also known as “skiing” a car, is a challenging skill usually reserved for professional stunt drivers and daredevils. However, if you’re curious about how it’s done, this article will provide a step-by-step guide on how to drive a car on two wheels. Remember that this maneuver is dangerous and should only be attempted by trained professionals in a controlled environment.

Step 1: Choose the right vehicle

To successfully drive on two wheels, you’ll need a suitable vehicle. The ideal choice is a lightweight, rear-wheel-drive car with good weight distribution and relatively narrow tires. This type of car provides better stability and control during the maneuver.

Step 2: Wear appropriate safety gear

Before attempting any high-risk driving maneuvers, it’s essential to wear appropriate safety gear. This includes a helmet, gloves, fire-resistant racing suit, and proper footwear for driving.

Step 3: Prepare a suitable area

Driving on two wheels requires ample space and an obstacle-free environment. Ideally, you should practice on level ground clear from any hazards, such as parked cars or pedestrians. Make sure the area is secured and has enough room for error in case things go awry.

Step 4: Master the basic skills

Before trying to lift your car onto two wheels, become proficient in controlling the vehicle at different speeds, shifting weight between front and back tires, and practicing rapid steering movements.

Step 5: Initiate the lift

Now that you’re ready to perform the maneuver, begin by slowly accelerating to approximately 20-30 mph (32-48 km/h). Choose either the left or right side for driving on two wheels – this depends on your own preference and how easily you can shift weight during the lift.

At this speed, turn the steering wheel quickly in the direction you want the car to lean while maintaining steady acceleration. As the car starts to lean, counter-steer slightly to find the balance point of the two wheels.

Step 6: Maintain balance and control

Once your car is on two wheels, maintain constant speed and throttle control. Use minor steering adjustments to keep the car balanced and remain in a straight line. A common mistake for beginners is oversteering, which can cause loss of balance and an unsafe situation.

Step 7: Safely bring the car back down

To safely end the maneuver, gently decelerate and steer in the opposite direction of the initial lift. This will gradually lower your vehicle back onto all four wheels. Be prepared to counter-steer as necessary to avoid tipping over completely.

Note of Caution:

Driving a car on two wheels is a dangerous and risky activity that should not be attempted by inexperienced or untrained drivers. The information provided here is solely for educational purposes and should not be considered as encouragement or an endorsement to try this maneuver without proper training, equipment, and supervision from professional stunt driving instructors in a controlled environment. Always prioritize safety over thrill-seeking when operating a motor vehicle.