How to Clean Plasti Dip: 10 Steps
![](https://www.thetechedvocate.org/wp-content/uploads/2024/01/v4-460px-Clean-Plasti-Dip-Step-6.jpg)
Plasti Dip is a versatile and easy-to-use rubberized coating that can be applied to various surfaces, offering protection and a new look. It’s essential to know how to clean Plasti Dip properly to maintain its appearance and prolong its lifespan. This article will walk you through the 10 steps to clean your Plasti Dip coated surfaces effectively.
1. Gather the necessary cleaning supplies: You will need soap, water, a bucket, a sponge or soft cloth, and microfiber towels for drying.
2. Mix soap and water in the bucket: Combine mild dish soap with water at a ratio of one tablespoon of soap per gallon of water. This will create a gentle cleaning solution that won’t harm the Plasti Dip coating.
3. Prewash the surface: Rinse off the Plasti Dip-coated surface with clean water using a hose or spray bottle. Make sure to remove any loose dirt, debris, or dust particles before applying the soapy solution.
4. Apply the soapy solution: Soak your sponge or soft cloth in the soap and water mixture before gently wiping it onto the surface you want to clean. Rub in circular motions, avoiding aggressive scrubbing or scratching.
5. Focus on dirty spots or stains: If you notice any stubborn dirt marks or stains, spend a little extra time gently rubbing these areas with your sponge or cloth until they’re fully cleaned.
6. Rinse thoroughly: Using clean water from either a hose or spray bottle, make sure to rinse away all soap from your Plasti Dip-coated surface thoroughly. Any lingering soap residue can harm the coating over time.
7. Dry gently: Using microfiber towels, carefully pat-dry the surface until it’s completely free of moisture. Avoid rubbing too hard as it can damage the Plasti Dip finish.
8. Additional deep-cleaning (optional): If some stains are still present, you can use a Plasti Dip cleaner and trap the area with a toothbrush or soft bristle brush. Apply the cleaner and gently scrub the areas where dirt remains, then rinse with water and dry.
9. Inspect your work: Check the surface to ensure there are no remaining stains or dirt spots. If you find any overlooked areas, repeat the necessary steps to clean them.
10. Maintain regularly: To keep your Plasti Dip looking fresh, aim to clean it regularly by following these steps every few weeks or months, depending on usage and exposure to dirt.
By following these 10 steps, you’ll be able to clean and maintain your Plasti Dip effectively, ensuring its longevity and keeping it looking great.