3 Simple Ways to Hang a Mirror on a Wall Without Nails
![](https://www.thetechedvocate.org/wp-content/uploads/2023/12/download-60-1.jpeg)
Introduction:
Hanging a mirror on a wall is a fantastic way to add depth and dimension to a room. However, using nails to hang a mirror can damage the wall and leave unsightly holes behind. If you are seeking alternatives that won’t damage your walls, this article will explore three simple methods to hang mirrors without using nails.
1.Adhesive Hooks:
One of the easiest ways to hang a mirror without nails is by using adhesive hooks. They are typically made of strong plastic or metal and come with a powerful adhesive on the backside.
– Step 1: First, clean the wall surface where you will place the hook; remove any dust and grease.
– Step 2: Peel off the protective backing from the adhesive hook.
– Step 3: Press the hook firmly against the wall and hold it for about 30 seconds.
– Step 4: Allow the adhesive to set for at least an hour before placing your mirror. Once ready, align the hanging wire or brackets of your mirror with the hooks.
Please note that adhesive hooks are best suited for lighter mirrors as heavy mirrors may not hold well and can cause damage.
2.Command Strips:
Command strips are another safe option for hanging mirrors without nails. These heavy-duty strips have an adhesive backing that sticks to both the wall and the back of your mirror.
– Step 1: Calculate how many command strips you need according to your mirror’s weight (check packaging instructions).
– Step 2: Clean both the wall surface and the back of your mirror with rubbing alcohol.
– Step 3: Attach one side of each strip pair to your mirror.
– Step 4: Remove the protective layer from the other side (the side that will stick onto your wall) on each pair of strips.
– Step 5: Press each strip onto your chosen spot on the wall for 30–40 seconds.
– Step 6: To make sure the strips have bonded, let them sit on the wall for an hour before hanging your mirror.
3.Monkey Hooks:
Monkey hooks are another alternative to nails; these unique hooks are engineered to be inserted into drywall without any tools.
– Step 1: Choose the hanging spot on your wall and mark it using a pencil.
– Step 2: Insert the curved end of the monkey hook into your marked spot while holding the straight end.
– Step 3: Push and twist the hook, guiding it through the drywall until only the small hook on the curved end is visible.
– Step 4: Align the wire or bracket of your mirror with the hook and hang your mirror in place.
Conclusion:
Hanging a mirror without nails is not only possible but also quite easy! By following one of these three simple methods, you can preserve your walls while still adding depth and dimension through stylish mirrors. So go ahead and give these techniques a try for a damage-free hanging experience.