How to Make Cement in the Wild: 6 Steps
![](https://www.thetechedvocate.org/wp-content/uploads/2023/12/maxresdefault-3-1-660x400.jpg)
If you ever find yourself stranded in the wilderness and need to build a shelter or structure, knowing how to make cement from natural materials can be a lifesaver. In this article, we will walk you through the six steps to create cement using only what nature provides.
1. Find the right materials:
The primary ingredient in cement is limestone, which is composed primarily of calcium carbonate. Locate an area with ample limestone deposits – typically found near water sources like streams or rivers. Collect enough rocks and stones made of limestone for your project.
2. Crushing the limestone:
Once collected, it’s essential to crush the limestone into smaller, manageable pieces. Use a rock or a sturdy tool to break large chunks of limestone until they’re about the size of a small stone or gravel.
3. Create a kiln:
A kiln is required for heating the crushed limestone and transforming it into quicklime (calcium oxide). Build a kiln using nearby stones or clay, ensuring there’s enough ventilation for air circulation. The kiln must be secure enough to hold fire and maintain high temperatures inside.
4. Burning the limestone:
Place your crushed limestone into the kiln and start a fire using sticks, brush or leaves as fuel. Once well-established, the fire needs to burn at extremely high temperatures for several hours (around 1800ºF / 1000ºC). You’ll know it’s hot enough when the limestone turns red-hot and eventually turns white – indicating it has transformed into quicklime.
5. Mixing with water and sand:
After allowing quicklime to cool down, mix it with water to create slaked lime (calcium hydroxide). In a separate container, make a sand-and-water mixture using clean sand from surrounding areas. Gradually combine the slaked lime with these ingredients until you achieve a thick paste – this is your cement mixture.
6. Building with cement:
Now that you have created cement from natural materials, it’s time to put it to use. Apply the mixture to your building project, be it a shelter or any required structure. Allow your construction ample time to dry and harden. The entire drying process can take several days, depending on factors like climate and humidity.
And there you have it – six steps to making cement in the wild. By mastering this skill, you’ll be better equipped for survival situations and able to construct necessary structures using only what nature provides.