How to Shorten Mini Blinds: 9 Steps
![](https://www.thetechedvocate.org/wp-content/uploads/2023/11/21.webp)
Introduction:
Mini blinds are a popular and cost-effective solution for window coverings in homes, offices, and other commercial spaces. However, sometimes they come in sizes that are too long for your windows. In such cases, shortening your mini blinds can give a clean and customized look to your windows while enhancing privacy and light control. Here’s a step-by-step guide to help you shorten your mini blinds in no time.
Step 1: Measure Your Window
Before getting started, measure the height of your window to determine the desired length of your mini blinds. Always double-check the measurements for accuracy.
Step 2: Remove the Blinds
Take down the mini blinds from the window and lay them on a flat surface with the slats facing down.
Step 3: Count the Slats
Count how many slats need to be removed to achieve your desired length. Never remove more than half the total number of slats to maintain proper functioning.
Step 4: Remove the Bottom Rail
Gently detach the bottom rail from the strings (lift cords) by sliding it out of its brackets.
Step 5: Unthread the Lift Cords
Carefully unthread the lift cords from all slats that require removal by pushing them out of each hole.
Step 6: Remove Unwanted Slats
Slide out all unwanted slats from their holders (clips), making sure not to damage them as you might need them later if you decide to lengthen your blinds again.
Step 7: Reattach the Bottom Rail
Once you’ve removed enough slats to reach your desired length, slide the bottom rail back into place through the last remaining slat.
Step 8: Adjust String Length
Trim any excess string below the bottom rail, leaving enough length so that you can still operate the lift cords comfortably. Be careful not to cut any horizontal connecting cords.
Step 9: Rehang the Blinds
Finally, rehang your shortened mini blinds to your window’s brackets, ensuring they’re aligned and secure. Test the lift cords and tilt mechanism to make sure everything works properly.
Conclusion:
With these nine steps, you can easily adjust the length of your mini blinds to fit your windows perfectly. Be patient and meticulous during this process, and you’ll have customized window coverings that are attractive and functional.