How to Calculate the Square Footage of a House
![](https://www.thetechedvocate.org/wp-content/uploads/2023/10/Square_Footage_Header-1-1-660x400.webp)
Knowing how to calculate the square footage of a house is essential for many purposes, including preparing an accurate listing, calculating living space, estimating renovation costs, or planning for new home construction. In this article, we will walk you through an easy step-by-step guide on how to calculate the square footage of your house.
Step 1: Gather Materials
First and foremost, gather the necessary materials to accurately measure the dimensions of your house. You will need:
– A measuring tape (preferably a long one)
– A pencil or pen
– Paper or note-taking device
– A calculator (or your preferred calculating device)
Step 2: Separate Your House into Sections
Divide your house into smaller sections or rooms. This will make it easier to measure each space individually and accurately. Here’s a general breakdown of sections in most houses:
– Bedrooms
– Bathrooms
– Living room
– Kitchen
– Dining room
– Hallways and staircases
– Garage or utility areas (if applicable)
Step 3: Measure Each Room
Using your measuring tape, measure the length and width of each room or section in feet, rounding up to the nearest foot if measurement falls in between. Make sure to measure wall-to-wall distances along the floor.
For example:
– Living room: Length (15 feet) x Width (12 feet)
Write down each measurement on your notepad under each room name.
Note: For irregularly shaped rooms like L-shaped spaces or those with recessed areas, consider dividing these spaces into smaller rectangles, too. Measure each rectangle separately then add their areas together.
Step 4: Calculate Area of Each Room
To calculate the area of each room or section in square feet, simply multiply its length by its width:
Area = Length x Width
Using our living room example:
Area = 15 feet (length) x 12 feet (width) = 180 square feet
Record each room’s area on your notepad.
Step 5: Add Up the Total Square Footage
Once you have calculated the area of each room, add those areas together to find the total square footage of your house:
Total Square Footage = Area of Room 1 + Area of Room 2 + Area of Room 3 + …
Make sure to include all sections and separate rooms in the calculation.
Step 6: Include Other Spaces (Optional)
If you wish to include other spaces such as a garage, shed, or unfinished basement, measure these areas using the same method – length times width – and add them to your total square footage calculation.
Conclusion
Having a clear understanding of your home’s square footage is crucial for numerous reasons, from pricing your home accurately to planning renovations or expansions. This easy step-by-step guide not only simplifies measuring and calculating your house’s square footage but is also applicable to any residential or commercial space!