How to Spin Wool
![](https://www.thetechedvocate.org/wp-content/uploads/2023/10/How-to-Spin-Wool.jpg)
Introduction:
Spinning wool can be an incredibly rewarding and therapeutic activity. It allows you to create your own unique yarn for crafting garments, accessories, or home décor items. In this article, we will guide you through the process of spinning wool from raw fleece to a beautiful finished yarn.
1. Preparing Your Fleece:
Before spinning your wool, you need to prepare the raw fleece. Here’s the process:
a. Skirting: Examine your fleece and remove any obvious vegetable matter, manure, or heavily soiled areas.
b. Washing: Gently wash the fleece by submerging it in lukewarm water with mild detergent. Swish the fleece around, allow it to soak, then rinse thoroughly. Repeat as necessary and allow it to dry completely.
2. Carding Your Wool:
Carding is the process of brushing and aligning the wool fibers so that they can be spun into yarn. You can use hand carrers or a drum carder for this process.
a. Tease the wool by gently pulling apart small sections. This helps loosen up tangled and compacted fibers.
b. Hold one hand carder in your non-dominant hand and use your other hand to card small amounts of wool onto it.
c. With both carders facing each other, gently brush the wool from one carder onto another until you have smooth batts of aligned fibers.
3. Spinning Your Yarn:
You can either spin using a drop spindle or a spinning wheel; both methods work great for beginner spinners.
a.Drop Spindle:
i) Tie a leader (a short length of yarn) to your spindle and add a loop at the end.
ii) Draft out some fibers from your carded batts (also known as roving) and attach them to the leader.
iii) Twirl the spindle to create twist and allow it to move up the fibers, turning them into yarn.
iv) Wind the spun yarn onto the spindle and continue this process until you have spun all your wool.
b. Spinning Wheel:
i) If you are using a spinning wheel, set it up according to the manufacturer’s instructions.
ii) Attach the leader to your wheel’s bobbin and loop your wool onto it.
iii) Start treadling (using your feet to turn the wheel) as you slowly draft out fibers from your roving.
iv) The twist from the spinning wheel will turn those fibers into yarn; wind it onto the bobbin and continue spinning until all your wool is processed.
3. Plying Your Yarn:
Plying involves twisting two or more strands of spun yarn together. This step is optional, but it can add strength and visual interest to your final product.
1. Choose two or more strands of your handspun yarn and attach one end of each strand to your drop spindle or spinning wheel.
2. Begin twisting them together in the opposite direction from which they were originally spun.
3. Wind the plied yarn onto your spindle or bobbin; inspect for evenness, adjusting tension if necessary.
4. Finishing Your Yarn:
To set the twist and finish your handspun yarn:
a. Wind your finished yarn into a skein using a niddy noddy or your arms.
b. Tie off the skein with scrap pieces of yarn in several places to prevent tangling.
c. Soak the skein in lukewarm water with mild detergent for around 20 minutes; this helps relax and set the twist.
d. Gently wring out