3 Ways to Make a Rubber Band Guitar
If you’re looking to create a fun and innovative musical instrument with minimal resources, a rubber band guitar is just the ticket! This DIY project is especially engaging for children, as it teaches them about the science of sound and vibrations while also sparking their creativity. In this article, we’ll discuss three different methods to make a rubber band guitar.
1. Shoebox Guitar
What you’ll need:
– A shoebox (or any other small cardboard box)
– 4-6 rubber bands of assorted lengths
– A paper towel roll
– Scissors or a box cutter
Instructions:
1. Remove the lid from the shoebox.
2. Use scissors or a box cutter to cut a hole (approximately 3 inches in diameter) in the center of one of the longer sides of the shoebox.
3. Stretch the rubber bands across the length of the shoebox, positioning them over the hole. Ensure that each band is securely placed along both sides.
4. Insert the paper towel roll into the hole, serving as your guitar’s neck.
5. Pluck or strum the rubber bands to make music!
2. Wooden Guitar
What you’ll need:
– A piece of wood (approx. 20 inches long and 6 inches wide)
– 4-6 rubber bands
– Screwdriver and screws
– A short piece of dowel or small wooden block
– Wood glue
Instructions:
1. If necessary, sand down any rough edges on your piece of wood.
2. Wrap the rubber bands around the entire width of your wooden plank, evenly spaced apart.
3. Attach a small wooden dowel or block to one end of your plank with screws to serve as a bridge for your strings.
4. Glue another small wooden piece or dowel to the other end, acting as a nut inside which to anchor your strings.
5. Pluck, strum or even add tuning pegs to make your wooden rubber band guitar playable.
3. PVC Pipe Guitar
What you’ll need:
– A 24-inch PVC pipe (1.5-2 inches in diameter)
– 4-6 rubber bands
– A small rectangular wooden block
– PVC pipe cap
– Sandpaper
– Glue or adhesive tape
Instructions:
1. Use sandpaper to smooth any rough edges on your PVC pipe.
2. Glue or attach the wooden block to one end of the pipe with adhesive tape, ensuring that it is securely positioned.
3. Stretch the rubber bands across the length of the PVC pipe, making certain that they pass over the wooden block and are evenly spaced.
4. Place a PVC pipe cap on the other end of your pipe, acting as a headstock to anchor your strings.
5. Play your PVC pipe rubber band guitar by plucking or strumming!
In conclusion, making a rubber band guitar is an enjoyable and educational activity for children and adults alike. With just a few simple household items, you can create a fun, playable instrument that will inspire creativity and teach valuable lessons about physics and sound. Whichever method you choose, enjoy crafting and playing your homemade rubber band guitar!