How to calculate equivalent resistance
![](https://www.thetechedvocate.org/wp-content/uploads/2023/09/cropped-equires_ad2-660x400.jpg)
The concept of equivalent resistance is crucial in understanding and analyzing electrical circuits. It simplifies complex circuits by converting them into an equivalent circuit composed of single resistors. In this article, we will discuss how to calculate the equivalent resistance of a given circuit based on series and parallel connections.
Series Connection:
In a series connection, resistors are connected end-to-end such that the current passing through each resistor is the same. To calculate the equivalent resistance (Req) in this type of connection, simply add up the individual resistances:
Req = R1 + R2 + R3 +…+ Rn
Where:
R1, R2, R3,…, Rn are the individual resistor values
Example:
R1 = 10 ohms
R2 = 20 ohms
R3 = 30 ohms
Req = 10 + 20 + 30 = 60 ohms
Parallel Connection:
In a parallel connection, resistors are connected in such a way that their endpoints (start and end) are joined together. The voltage across each resistor is the same, but the current gets divided among them. To calculate the equivalent resistance in this configuration, use the following formula:
1/Req = 1/R1 + 1/R2 + 1/R3 +…+ 1/Rn
Where:
R1, R2, R3,…, Rn are the individual resistor values
After calculating 1/Req, take its reciprocal to find Req.
Example:
R1 = 10 ohms
R2 = 20 ohms
R3 = 30 ohms
1/Req = 1/10 + 1/20 + 1/30
=> Req = (LCM of denominators)/(sum of numerators) => Req= 60/(6+3+2) = 60/11 = 5.45 ohms
Mixed Connection (Series and Parallel):
In real-life electrical circuits, resistors are often connected in a combination of series and parallel connections. In this case, first, simplify the circuit by calculating the equivalent resistance for each set of series and parallel connections. Then, use the formulas for series and parallel connections as appropriate to find the overall equivalent resistance.
Conclusion:
Calculating equivalent resistance is essential for understanding the flow of current and voltage in electrical circuits. By simplifying complex circuits into single resistors, one can analyze the behavior of the circuit more efficiently. As a general rule, remember to calculate the equivalent resistance for series connections by adding individual resistances, while in parallel connections, add the reciprocals of individual resistances and then take their reciprocal to find the equivalent resistance.