3 Ways to Remove a Rounded Nut
![](https://www.thetechedvocate.org/wp-content/uploads/2024/04/3-Ways-to-Remove-a-Rounded-Nut.jpg)
Introduction:
A rounded nut can be a troublesome issue when you’re trying to complete a project or repair. However, don’t fret! There are effective methods for removing rounded nuts that should help you overcome this challenge. In this article, we will discuss three ways to remove a rounded nut, so you can continue with your job smoothly.
Method 1: Using a Socket with Left-Handed Drill Bits
One of the most effective ways to remove a rounded nut is by using a socket designed for this purpose together with left-handed drill bits. Follow these steps:
1. Choose the appropriate socket size – Select the correct size socket that fits snugly onto the rounded nut.
2. Attach left-handed drill bit – Mount the left-handed drill bit onto your electric drill and set the rotation direction to reverse.
3. Drill into the nut – Carefully drill into the center of the nut, gradually increasing pressure as you go.
4. Apply more force if needed – If the left-handed drill bit doesn’t remove the nut, increase the torque of your electric drill and continue drilling.
Method 2: Nut Splitters
Another method for removing a rounded nut is by using a special hand tool called a nut splitter. This tool is designed explicitly for shearing off stuck nuts.
1. Positioning – Place the nut splitter over the rounded nut and line up its chisel against one side of the nut.
2. Tightening – Use an adjustable wrench or adjustable pliers to tighten the bolt on top of the splitter gently until it penetrates through the nut.
3. Splitting – Continue tightening until you see that either side of the nut has split enough for easy removal.
Method 3: Pliers and Penetrating Oil
This method is ideal when you don’t have specialized tools handy but do have pliers and penetrating oil available:
1. Apply penetrating oil – Generously spray the rounded nut with penetrating oil and let it sit for a few minutes to allow the oil to seep into the threads.
2. Grip with pliers – Use a pair of locking pliers with serrated jaws to firmly grip onto one side of the nut.
3. Turn counterclockwise – Apply pressure on the pliers to turn the nut counterclockwise. If necessary, reapply more oil and let it soak in before attempting another turn.
Conclusion:
Removing a rounded nut doesn’t need to be a daunting task. With these three methods at hand, you can overcome this challenge and move forward with your project or repair without further delays. Be patient and gentle when attempting any of these methods, as excessive force might cause damage to your equipment or materials.