3 Ways to Refill a Zippo Lighter
![](https://www.thetechedvocate.org/wp-content/uploads/2024/04/3-Ways-to-Refill-a-Zippo-Lighter-wikiHow.jpg)
Introduction:
Zippo lighters are a popular and convenient way to light candles, start an outdoor fire, or simply enjoy the nostalgic feel they offer. With proper maintenance and care, these lighters can last a long time. One critical aspect of keeping your Zippo lighter functioning well is refilling it with fuel. In this article, we will discuss three ways to refill a Zippo lighter to ensure it remains in good working condition.
Method 1: Using Zippo Brand Lighter Fluid
Step 1: Prepare your workspace
Choose a well-ventilated area, away from open flames and sources of ignition. Place your lighter on a flat surface and have a clean cloth handy for any spills.
Step 2: Open the lighter
Grasp the metal case, firmly lift the lighter insert, and remove it from the bottom half. This will give you access to the fuel-soaked cotton inside.
Step 3: Carefully fill with lighter fluid
Using a Zippo-branded lighter fluid container, gently squeeze the bottle until the fluid saturates the cotton inside without overfilling or causing spills. Allow it to absorb for a minute or two.
Step 4: Reassemble the lighter
Slide the lighter insert back into the bottom half of the metal casing, ensuring that it fits snugly and securely.
Method 2: Using an Alternative Fluid (Naphtha or Ronsonol)
If you can’t find Zippo branded lighter fluid, you can use other types such as Naphtha or Ronsonol. Follow these steps:
Step 1-3: Same as Method 1.
Step 4: Evaporate excess fluid
Leave your lighter open in an upright position for a couple of minutes to allow excess liquid to evaporate before reassembling it.
Method 3: Refilling with Butane Inserts
For those who prefer to use butane instead of liquid fuel, consider using a butane insert in your Zippo lighter:
Step 1: Purchase the appropriate butane insert
These are readily available online or in tobacco shops. Ensure you obtain the correct size for your Zippo lighter model.
Step 2: Remove the old insert and replace with the new butane insert
Simply slide the original insert out from the bottom half of the metal casing and replace it with the purchased butane insert.
Step 3: Fill with butane fuel
Holding your lighter upside-down, press the nozzle of a canister of butane fuel into your lighter’s fill valve. Listen for the hissing sound indicating gas is filling the lighter. Release after 5-7 seconds or when you hear a sputtering sound which indicates it’s full.
Conclusion:
Refilling a Zippo lighter is a straightforward process that enhances its longevity and helps maintain optimal performance. By following one of these three methods, you will always have a reliable source of flame when you need it most.