Introduction:

Slip and slides are a fantastic way to beat the heat and have some outdoor fun during the summer months. Creating your own long slip and slide can be a fun DIY project that the whole family can enjoy. In this article, we will explore three different ways to make a long slip and slide for your backyard.

1. The Tarp Method:

Materials:

– A large tarp or plastic sheeting

– Garden hose with a spray nozzle

– Tent stakes or weights

Instructions:

1. Find a flat, open area in your backyard with a slight incline for the best sliding experience.

2. Roll out the tarp or plastic sheeting to your desired length, ensuring there are no wrinkles or folds.

3. Use tent stakes or weights to secure the corners and edges of the tarp, making sure it’s taut.

4. Connect the garden hose to a water source and adjust the spray nozzle to produce a fine mist.

5. Spray water evenly across the entire surface of the tarp, ensuring it’s wet enough for sliding.

6. Add some dish soap for extra slipperiness, if desired.

2. The Pool Noodle Method:

Materials:

– Several pool noodles

– Heavy-duty plastic sheeting or a large tarp

– Duct tape

– Garden hose with a spray nozzle

– Tent stakes or weights

Instructions:

1. Find a suitable area in your backyard with a slight incline for optimal sliding.

2. Roll out the plastic sheeting or tarp to your desired length.

3. Use duct tape to attach pool noodles along both sides of the plastic sheeting or tarp, creating raised edges to prevent people from sliding off.

4. Secure the corners and edges using tent stakes or weights.

5. Connect the garden hose to a water source, adjusting the spray nozzle for a fine mist.

6. Evenly spray water across the entire surface and add some dish soap for extra slipperiness, if desired.

3. The PVC Pipe Method:

Materials:

– PVC pipes and connectors

– Heavy-duty plastic sheeting or a large tarp

– A drill and small drill bit

– Garden hose with a spray nozzle

– Tent stakes or weights

Instructions:

1. Determine your desired slip and slide length and purchase enough PVC pipes and connectors to create a frame.

2. Connect the PVC pipes in a rectangular shape using the connectors, ensuring it’s large enough to accommodate the plastic sheeting or tarp.

3. Drill small holes at regular intervals along the top PVC pipe to create a water spray.

4. Attach the garden hose to one end of the top PVC pipe using a hose connector, securing it in place with duct tape or zip ties.

5. Lay the plastic sheeting or tarp over the PVC frame, securing it with tent stakes or weights on all sides.

6. Turn on the water and let it flow through the PVC pipe, creating a spray that evenly wets the surface. Add some dish soap for extra slipperiness, if desired.

Conclusion:

Whether you choose to use a simple tarp, pool noodles, or a PVC pipe frame, creating your own long slip and slide can provide hours of entertainment for friends and family during summer months. Remember always to supervise children while they play and make sure everyone is aware of safety rules before they start sliding. Now go out there and have some slippery fun!