Cellular shades, also known as honeycomb shades, are a popular choice for window treatments due to their energy efficiency and ability to provide privacy while still allowing light into the room. However, over time, dust and dirt can accumulate on these shades, making them look less than pristine. To keep your cellular shades looking great, follow these three methods for cleaning them.

1. Dusting

Regular dusting is a simple yet effective way to maintain the cleanliness of your cellular shades. To dust your shades effectively, use a soft brush or the brush attachment on your vacuum cleaner. Gently run the brush along the length of the shades in both open and closed positions.

If you’re using a vacuum cleaner, set it to low suction to avoid damaging the shades. Dusting should be done at least once a month to prevent the buildup of dirt and debris.

2. Spot Cleaning

Occasionally, you might discover stains or smudges on your cellular shades that dusting alone can’t handle. In this case, spot cleaning is an excellent solution. Start by preparing a mild cleaning solution made of warm water and a few drops of mild dish detergent.

Dip a clean cloth or sponge into the solution, then gently dab at the stained area until it’s lifted. Be sure not to rub or scrub as it may damage the shade material. Once you’ve removed the stain, use another clean cloth dipped in water to rinse away any soap residue.

3. Deep Cleaning

In some cases, your cellular shades may require deep cleaning to remove stubborn dirt and grime. First, check with the manufacturer’s instructions for specific care information since some materials may not be suitable for deep cleaning.

Assuming it’s safe for your shades, start by removing them from the window frame and laying them flat on a clean surface. Preparing a cleaning solution using warm water and mild dish detergent in a large container or bathtub.

Submerge the shades into the solution, gently agitating them to loosen trapped dirt. Let them soak for 15-20 minutes but avoid leaving them in water for too long, as the material may weaken.

After soaking, gently rinse off the shades with clean water, ensuring that all soap residue is removed. Carefully squeeze out excess water and lay the shades flat to air dry. Once they’re completely dry, reinstall them back on the window frame.

Conclusion

Keeping your cellular shades looking their best doesn’t need to be a challenge. With these three cleaning methods, you can ensure that your shades remain clean and attractive, adding both beauty and functionality to your home’s décor. Regular dusting, spot cleaning, and occasional deep cleaning will keep your shades in top condition for years to come.